| Step | | Procedure & Parts & Tools |
| 1 |
|
TURN OFF MACHINE, AND DRAIN TANKS IF NEEDED.
|
| 2 |
|
REMOVE THE 13MM BOLT ON THE SIDE LATCH AND OPEN TANK.
| Ratchet-Socket metric 13mm |
|
|
| 3 |
|
REMOVE BATTERIES AND LAY MACHINE ON SIDE
| Wrench-metric 10mm |
|
| Wrench-metric 13mm |
|
|
| 4 |
|
LOOSEN THE SCREW ON THE HOSE CLAMPS, AND PULL THE HOSES OFF THE PUMPS.
| Screwdriver-flat tip |
|
|
| 5 |
|
CAREFULLY REMOVE PUMPS FROM BLACK PLASTIC HOLDER. NOTE THE ARROW ORIENTATION ON THE LABEL...THIS IS THE DIRECTION OF FLOW.
SPADE CONNECTIONS FOR THE PUMPS ARE HIGHLIGHTED.
|
| 6 |
|
SLIP THE NEW PUMP/S INTO THE HOLDER AND THEN RECONNECT THE HOSES AND CLAMPS.
|